nanoHome
Back

Care guide&Tradition

Material-specific care: stone, wood, leather, textiles, metals and other surfaces

Based on official manufacturer guidance. Applies to the model, material and finish identified above.

Read original guidance
&Tradition — manufacturer illustration 1

Stone

Marble

Reseal furniture stone yearly with a stone-specific product; remove spills promptly, avoid acidic liquids and use coasters. Lighting stone is unprotected: use a soft dry cloth; choose stone-specific cleaner for heavier dirt. Avoid aggressive or abrasive cleaners.

Original manufacturer guidance
Travertine

Reseal furniture stone yearly with a stone-specific product; remove spills promptly, avoid acidic liquids and use coasters. Lighting stone is unprotected: use a soft dry cloth; choose stone-specific cleaner for heavier dirt. Avoid aggressive or abrasive cleaners.

Original manufacturer guidance

Wood

Beech

Dust with dry lint-free cloth. For lacquered or stained beech use a wrung cloth with mild detergent and lukewarm water; follow the grain and dry immediately. Avoid aggressive cleaners, abrasives, strong sun, heat and humidity.

Original manufacturer guidance
Teak

Use the manufacturer teak Care Kit. Shelter in an unheated space in winter and protect from water discoloration. To retain the golden colour, use teak furniture oil twice yearly; light sanding can restore colour. Minor weathering cracks do not affect durability.

Original manufacturer guidance
Smoked Oiled Oak

Dust dry; wipe along the grain with a cloth wrung in lukewarm water and dry immediately. For heavier dirt choose soap for this finish. Avoid abrasives, aggressive cleaners, direct sun, excessive heat and humidity. Use soap for oiled wood.

Original manufacturer guidance
Oiled Oak

Dust dry; wipe along the grain with a cloth wrung in lukewarm water and dry immediately. For heavier dirt choose soap for this finish. Avoid abrasives, aggressive cleaners, direct sun, excessive heat and humidity. Choose oiled-wood soap. Walnut takes natural-coloured oil; oak uses white-pigmented or dark smoked oil.

Original manufacturer guidance
Oiled Walnut

Dust dry; wipe along the grain with a cloth wrung in lukewarm water and dry immediately. For heavier dirt choose soap for this finish. Avoid abrasives, aggressive cleaners, direct sun, excessive heat and humidity. Choose oiled-wood soap. Walnut takes natural-coloured oil; oak uses white-pigmented or dark smoked oil.

Original manufacturer guidance
Lacquered Oak

Dust dry; wipe along the grain with a cloth wrung in lukewarm water and dry immediately. For heavier dirt choose soap for this finish. Avoid abrasives, aggressive cleaners, direct sun, excessive heat and humidity. Choose soap for lacquered or stained wood.

Original manufacturer guidance
Lacquered Walnut

Dust dry; wipe along the grain with a cloth wrung in lukewarm water and dry immediately. For heavier dirt choose soap for this finish. Avoid abrasives, aggressive cleaners, direct sun, excessive heat and humidity. Choose soap for lacquered or stained wood.

Original manufacturer guidance
Black Lacquered Oak

Dust dry; wipe along the grain with a cloth wrung in lukewarm water and dry immediately. For heavier dirt choose soap for this finish. Avoid abrasives, aggressive cleaners, direct sun, excessive heat and humidity. Choose soap for lacquered or stained wood.

Original manufacturer guidance
Dark Stained Oak

Dust dry; wipe along the grain with a cloth wrung in lukewarm water and dry immediately. For heavier dirt choose soap for this finish. Avoid abrasives, aggressive cleaners, direct sun, excessive heat and humidity. Choose soap for lacquered or stained wood.

Original manufacturer guidance
Lacquered Veneer

During the initial weeks avoid leaving objects in one place for long periods: uneven UV exposure may cause lasting colour marks. Veneer naturally varies and patinates; prolonged object placement can produce uneven ageing.

Original manufacturer guidance

Leather

Tailor

Vacuum gently or dust dry; no detergents or abrasive tools. Blot spills and clean seam-to-seam with a soft cloth wrung in lukewarm demineralised water, never local scrubbing. Minor marks may fade untreated; extensive damage needs professionals. Avoid sun, heat and dry air. Condition with leather-specific cream at least four times yearly, following its instructions; dry before use.

Original manufacturer guidance
Noble

Vacuum gently or dust dry; no detergents or abrasive tools. Blot spills and clean seam-to-seam with a soft cloth wrung in lukewarm demineralised water, never local scrubbing. Minor marks may fade untreated; extensive damage needs professionals. Avoid sun, heat and dry air. Condition with leather-specific cream at least four times yearly, following its instructions; dry before use.

Original manufacturer guidance
Elmosoft

Vacuum gently or dust dry; no detergents or abrasive tools. Blot spills and clean seam-to-seam with a soft cloth wrung in lukewarm demineralised water, never local scrubbing. Minor marks may fade untreated; extensive damage needs professionals. Avoid sun, heat and dry air. Condition with leather-specific cream at least four times yearly, following its instructions; dry before use.

Original manufacturer guidance

Rattan and paper cord

Rattan

Dust dry and minimise wet cleaning. Dry heated rooms can make rattan brittle. Maintain with 2–3 tablespoons soap flakes in one litre of hot demineralised water: spray both sides, allow absorption, then gently blot excess water.

Original manufacturer guidance
Paper Cord

Dust dry; blot spills immediately without rubbing. Minimise wet cleaning. Strong or dark liquids and fabrics may discolor paper cord; light, heat and humidity can alter colour. Tension can loosen with use.

Original manufacturer guidance

Metal

Lacquered & powder-coated metal

Dust dry or wipe with a wrung cloth, mild detergent and lukewarm water. Dry immediately. Avoid aggressive or abrasive cleaners.

Original manufacturer guidance
Stainless Steel

Dust dry. Use only stainless-steel-specific detergent and follow its instructions; unsuitable cleaners may permanently damage the surface.

Original manufacturer guidance
Brass - Polished

Identify whether the brass is lacquered or untreated. Uncoated brass patinates; use brass-specific cleaner/polish if patina is unwanted. Dust dry and dry immediately after cleaning to prevent marks; avoid abrasives. The manufacturer page distinguishes coated from untreated finishes.

Original manufacturer guidance
Brass - Bronzed

Identify whether the brass is lacquered or untreated. Uncoated brass patinates; use brass-specific cleaner/polish if patina is unwanted. Dust dry and dry immediately after cleaning to prevent marks; avoid abrasives. The manufacturer page distinguishes coated from untreated finishes.

Original manufacturer guidance
Aluminium - Polished

Dust dry or use a cloth wrung in lukewarm water. Avoid steel wool, abrasive polish and aggressive detergents.

Original manufacturer guidance
Aluminium - Painted

Dust dry or use a cloth wrung in lukewarm water. Avoid steel wool, abrasive polish and aggressive detergents.

Original manufacturer guidance

Textiles and rugs

Outdoor Textiles

Vacuum with a soft brush. Do not steam-clean. Blot liquids promptly, vacuum loose debris and use a damp sponge with mild cleaning solution for residue; air dry. Persistent stains need professionals. Avoid direct sun, excessive heat and sharp objects.

Original manufacturer guidance
Polyester Webbing

Vacuum with a soft brush. Do not steam-clean. Blot liquids promptly, vacuum loose debris and use a damp sponge with mild cleaning solution for residue; air dry. Persistent stains need professionals. Avoid direct sun, excessive heat and sharp objects.

Original manufacturer guidance
Upholstery Webbing

Vacuum with a soft brush. Do not steam-clean. Blot liquids promptly, vacuum loose debris and use a damp sponge with mild cleaning solution for residue; air dry. Persistent stains need professionals. Avoid direct sun, excessive heat and sharp objects.

Original manufacturer guidance
Wool, Natural Fibres or Blends

Vacuum with a soft brush. Do not steam-clean. Blot liquids promptly, vacuum loose debris and use a damp sponge with mild cleaning solution for residue; air dry. Persistent stains need professionals. Avoid direct sun, excessive heat and sharp objects.

Original manufacturer guidance
Boucle

Vacuum with a soft brush. Do not steam-clean. Blot liquids promptly, vacuum loose debris and use a damp sponge with mild cleaning solution for residue; air dry. Persistent stains need professionals. Avoid direct sun, excessive heat and sharp objects.

Original manufacturer guidance
Velvet

Vacuum with a soft brush. Do not steam-clean. Blot liquids promptly, vacuum loose debris and use a damp sponge with mild cleaning solution for residue; air dry. Persistent stains need professionals. Avoid direct sun, excessive heat and sharp objects.

Original manufacturer guidance
Sheepskin

Vacuum at the lowest setting with a soft brush. Blot with a lint-free cloth and lukewarm water/mild wool shampoo; dry at room temperature. Do not iron, bleach or use detergents. Deep cleaning needs an upholstery specialist.

Original manufacturer guidance
Handloomed Rugs

Vacuum with a soft brush; dab spots gently using a cloth dampened with carbonated water. Use professional cleaning for deeper dirt and a rug underlay. Initial shedding is normal; avoid strong sun and heat.

Original manufacturer guidance

Other surfaces

Recycled Plastic

Use a soft cloth wrung in lukewarm water; mild detergent for heavier dirt. Dry immediately to avoid watermarks.

Original manufacturer guidance
Linoleum

Dust dry; use a wrung cloth with mild detergent and lukewarm water for routine cleaning. Protect from sharp objects and rough bases with coasters. The manufacturer offers a material-specific care kit.

Original manufacturer guidance
Fenix Nano Laminate

Dust dry; use a wrung cloth with mild detergent and lukewarm water for routine cleaning. Protect from sharp objects and rough bases with coasters. The manufacturer offers a material-specific care kit.

Original manufacturer guidance
Mouth-Blown Glass

Dust dry or use mild glass cleaner in lukewarm water with a wrung cloth; dry immediately, no abrasives. Collect glassware is dishwasher-safe up to 50°C; avoid harsh chemicals. For deeper cleaning the manufacturer recommends overnight soaking in water and vinegar.

Original manufacturer guidance
Smoked Cast Glass

Dust dry or use a wrung cloth with mild glass detergent and lukewarm water. Dry immediately; avoid abrasives.

Original manufacturer guidance
Ceramic

Dust dry; wipe using a wrung cloth with mild detergent in lukewarm water. Avoid aggressive or abrasive cleaners.

Original manufacturer guidance

Official documents